Meyer Pre-Assembled HomePlow Snow Plow 24000

It took longer to remove the frame end cap screw than to install the hitch. I have a new frame on my 2006 Tacoma but they used the old end caps and stripped one of the bolt heads. After removing the end caps it was about an hour to install the hitch. There were three different torques two bolts would not take a socket. The plow blade wire harness took about a half hour, the blade mount about 15 minutes. The quality of the hitch and plow are outstanding, welds, fit and finish are great. Former quality control auditor. Haven't had snow to plow yet. I got my first Meyer Plow 50 years ago, full hydraulic mounted on a GMC 12 foot stake dump with a ton of weight on the axle.never got tuck, plowed in the blizzard of '76

I knew I was likely going to purchase this plow, however did not expect on Dec. 9th 2022 to take a ride off the road onto a rock wall, so now I had to fix the frame and the whole front end, picked up the hitch - repairs done, now need new bumper still, finally got that, put it and the hitch on (I recommend cutting the 2 rear bolts very short, made install a piece of cake, also, use a string to pull bolts up and through frame into hole, basically get a strong but small piece of string, run it through the hole where it goes and the other hole where you can fit the bolt into the frame, take a short piece of electrical tape, connect the string to the end of the bolt with the tape (as small as possible, inline) anyway, carefully pull bolt into hole and with your fingers (if possible) carefully pushing and guiding and gentle tugs on the string, it will get those bolts to where they need to go) I should have paid more attention to how short we cut the rear bolts (apologies). I want to think we had a little over an inch of total threads above the bolt head. I am glad I did this well ahead of time, worth it. As far as reviewing the plow itself? Basically it was very easy to put on the Envoy, I did get the wheel set, makes life real easy. The one snafu I had and, I get it, it happens, somehow, someway, I got the wrong wiring kit (someone messed up at Meyers, oooppsies) (it happens), no biggy, customer support is phenomenal and good. I will be so much more comforted when the snow flies knowing I can clear my way. Thank You AAG 🙂

Not too satisfied with the product, hangs very low and doesn’t have a lot of mobility.

It’s got to be best home plow on market. Works great and is quality made. Can’t believe how easy it is to take off my vehicle. Jeep Wrangler. And put back on. Less than 5 minutes. Only thing or feature I would improve on is remote fob for blade operation.

The plow took no time to install--it was the receiver that took 2+ hours. The holes did not exactly line up so it took some work to get it mounted and bolted in place. The receiver assembly is a snug fit onto the truck but that is probably a good thing--no play at all when I drive with the plow attached. Now I need some snow so I can play! I gave all 5 stars because it is solid, looks great and seems like it should do the job well--looking forward to proving that out with some snow.