Heartthrob Mandrel Bent Exhaust Pipes

4053 M

Popular Related Products

Product Details

  • Upgrade your vehicle's exhaust system with Heartthrob Mandrel Bent Exhaust Pipes
  • Guide exhaust away from your engine with these Mandrel bent pipes for more horsepower and torque
  • Heartthrob Exhaust mandrel bend pipes maintain diameter throughout any bends to maintain airflow volume
  • Applications for both vintage and contemporary vehicles
  • Aluminized or stainless steel construction
  • Corrosion-resistant pipes

    • Complete your vehicle's exhaust system with pipes designed to improve flow volume and give your vehicle more power. Said another way, complete your vehicle's exhaust system with Heartthrob Mandrel Bent Exhaust Pipes.

    The mandrel bending process allows these pipes to maintain their diameter through the bend. Instead of wrinkling and restricting air flow through bends, Heartthrob Mandrel Bent Exhaust Pipes let everything through, retaining the pipe's original diameter to maintain power. This unrestricted air flow lends your vehicle the kind of performance enchancements you can feel as you drive, increasing horsepower and torque. This Heartthrob Exhaust Mandrel Bent Pipe collection comes with a variety of diameters (2.25" to 5") and combinations to provide your particular vehicle with everything it needs. Both aluminized and stainless steel pipes are available, and these pipes are corrosion-resistant.

    Replicate any pipe configuration and increase your vehicle's performance. Exhaust continuity means greater power and increased performance, both of which you can count on with Heartthrob Mandrel Bent Exhaust Pipes.

    Heartthrob Mandrel Bent Exhaust Pipes Customer Reviews

    Overall:
    Performance:
    Quality:
    Appearance:

    Overall Rating:

    4.6 of 5

    Average Install Time:

    1 - 2 hours
    who drives a Oldsmobile Cutlass
    Overall:
    Performance:
    Quality:
    Appearance:

    Was building a complete system at home and this was the missing link I needed to do it myself with minimal spend. Tailpipe fits nicely with only minimal trimming required. Looks great and flows well with smooth mandrel bends. Pleased.

    Install Time: More than 2 hours


    Overall:
    Performance:
    Quality:
    Appearance:

    Perfect replacement for the pipes I needed, original pipes rusted at the clamps. Customer service was good helped allot with what I needed to know so I got the right pipes that I was looking for.

    Install Time: Under 30 minutes

    who drives a Dodge Dart
    Overall:
    Performance:
    Quality:
    Appearance:

    There are few choices for 3" Mopar A-body tailpipes. The Heartthrob pipes are well-designed because they have a joint at the top of the over-axle area. Makes them much easier to install especially if you're working on jack stands and don't have a lift. That joint also made it possible (with a minor rework) to use them with relocated springs, into the longitudinals (3" inward). Removing a small wedge (3/8" at widest point) from the front pipe and re-welding the gap changed the angle of the rear pipe so that it clears the relocated leaf springs. Note: this will not fit with the stock gas tank under the floor, though. Anyway it beats spending hours with a pile of mandrel bends trying to get the right angle up and over the axle!

    Install Time: 1 - 2 hours


    Overall:
    Performance:
    Quality:
    Appearance:

    I was trying to do a custom dual exhaust on my Ranger, but didn't want to buy a kit. These pipes fit the bill perfect. The only issue I ran into is that the forward ends are expanded to 2 1/4" ID (they are made to fit over the Y pipe in Heart Throb's Deep Tone Dual kit). I was able to correct this with some adapter pieces. Anyway the spacing works out good for a single in/dual out muffler, and the pipes are almost long enough to reach the bumper despite being intended to be used with tips. I cut mine off near the leaf springs, welded a 45 on each side and ran tips out the sides at the back of the bed. Probably worth noting is that my truck has a hitch receiver and the pipes were running directly into the receiver when installed as they were supposed to be. May not be the case for all, the bar on my receiver is as wide as the frame rails.

    Install Time: More than 2 hours


    Overall:
    Performance:
    Quality:
    Appearance:

    Great set of pipes, fit well. I hooked them to a Cherry Bomb muffler and used the Heartthrob black resonators to build a great sound.

    Install Time: 30 - 60 minutes


    Overall:
    Performance:
    Quality:
    Appearance:

    Item was delivered quickly and with the correct parts. I had ordered these parts 3 times before from different vendors and never received the right part. These parts from Heartthrob were exactly what I needed. Thanks much!

    Install Time: 1 - 2 hours

    who drives a Ford Ranger
    Overall:
    Performance:
    Quality:
    Appearance:

    Everything came in fairly fast. Though I thought I got the right inlet/outlet sizes, they all came the same size so I had to weld the whole thing (which was my mistake). Checkout was a breeze, definitely recommend ordering from this site.

    Install Time: 1 - 2 hours

    who drives a Ford F-150
    Overall:
    Performance:
    Quality:
    Appearance:

    I was very pleased with my order of the Duel Exhaust pipe I ordered. I did have it installed at a shop, but could have done it Myself, everything fit as promised.(I also had ordered MagnaFlow Direct Fit Catalytic Converters, Cherry Bomb 2 1/2" single inlet- duel outlet,) So everything worked out Excellent..

    Install Time: 30 - 60 minutes

    who drives a Chevrolet Camaro
    Overall:
    Performance:
    Quality:
    Appearance:

    The geometry did not fit well near the trunk pan. They are hard up against the trunk pan and vibrate. Also, they where too long at the exit. They went so far back they hit the rear shackle. So, no not happy with them.

    Install Time: 1 - 2 hours

    who drives a Chevrolet Camaro
    Overall:
    Performance:
    Quality:
    Appearance:

    I am very happy with my part but it took a very long time to process it.

    Install Time: 1 - 2 hours